X Bending Axes

Equipped with 3 – 8 electric CNC axes, multiple tube bending stacks, and the unique technology, this line of LYM tube benders can offer one of the highest performance solutions available in the market.

3 – 8 Servo Motors
LYM’s unique technology
Side positioned bending head/Ultra-thin head and carriage
Centralized lubrication for sliding area
Automatic mandrel lubrication
LYM controls software
Single or multi-stacks
Independent pressure die system for each tube bending stack
Wiper die seat and lubrication

For example, in a 4-axis bending machine, one axis may be responsible for the primary bending of the material around a mandrel, while other axes can control the feeding of the material, the rotation of the mandrel, and the adjustment of the bending angle. This coordinated movement allows for the creation of complex curved shapes that would be difficult or impossible to achieve with a single-axis machine.

Description

Brand Name:	LYM
Model Number	DW18CNCX3A-3S/DW18CNCX6A-4S/ DW25CNCX3A-2S/ DW25CNC4A1S/ DW25CNCX4A-3S-T/ DW25CNC6A/ DW25CNC8A3S-T-Ⅱ/ DW38CNCX3A-1S-C/ DW38CNC3A1S(B+C)/ DW38CNC3A1S/ DW38CNC4A2S-T/ DW38CNC5A3S/DW38CNCX6A-4S/ DW50CNC3A1S/ DW50CNCX3A-2S/DW50CNC3A2S-T-C/DW63CNCX3A-2S/DW63CNCX8A-4S/ DW65CNC8A4S/DW75CNCX3A-2S/DW75CNCX4A-2S/ DW75CNCX5A-3S/DW75CNCX8A-3S/DW75CNCX8A-4S/ DW89CNC3A1S/DW89CNCX3A-2S/ DW100CNC4A2S/ DW120CNC9A3S-T/DW130CNCX3A-2S/
Type	CNC CONTROL AUTOMATIC (X SERVO /A SERIES)
Certification	CE / SGS / TUV / ISO
Place of Origin	China
Application	Pipes or solid bars, various materials such as steel, stainless, aluminum and copper
Packaging Details	Packed in stretch film firstly, and then reinforced with plywood for outer packing

Tube Bending + Cutting Cell(Optional)

It can be integrated with Automatic Loaders (AF, AFM, Robots) and Automatic Unloaders (AUL, Robots) for full automation. This tube bender series can offer one of highest performance solutions available in the market.

The LYM System

•Allows for automation of bending and cutting processes in one machine, from a single tube
• This system creates minimum cutting deformation, enabling the finished part to pass to the next process without having to calibrate or deburr it
• Allows up to 18 sets bends((PLC type) on the same pipe,or 33 sets bends( Industrial computer type)on the same pipe,maximizing utilization of the complete tube.
• Ultra-large CPU that can hold the edition of 400 groups of archives is applied. If it is not sufficient, transmission software can be purchased and installed for the computer. The archives can be stored in hard disk to expand the number of edit groups infinitely. (Optional)

Advanced Technology

•Built-in gearbox with direct connection to electric servo.
•Highest transmission performance (90%+ efficiency).
•High bending accuracy (+/- 0.05° ~ +/-0.1°)
•Maximum Working Area and Minimal Interference.
•Heat exchanger is provided for the electric control system for automatic heat dissipation. If required, NC air conditioner can be purchased to ensure service life of electric control system. (Optional)
•The machine is provided with automatic oil injection system to reduce friction of elbow and ensure quality of elbow. (Optional).

LYM Controls, Tube Bender Software and Operation Interface

• Automatic springback compensation Recapturing function for short lengths XYZ and YBC coordinates conversion
• 3D display of bending parts(Optional) Mirroring and image reversal of parts
• Windows platform
• Self-diagnostics + Error messages display
• Each bends can set compensation value, speed and demould clearance according to different materials
• For same tube, each elbow can have 5 action sequences and 10 sections of speed independently for operation of operators. Besides, the work efficiency can be improved and tube interference point can be reduced.
• Chinese and English on the touch screen can be switched and the products can also be ordered according to requirements if it is another language on the screen. (Optional)
• The feed position of feed trolley, the interference position of safety device and digital module and interference position of guide mould can be fine adjusted manually and memorized automatically to eliminate the error of manual measurement and losses caused by machine collision.
• Action segments can be selected during actual bending to observe interference points and modification work and improve efficiency.
• After the completion of data editing, the data will be protected by password to prevent unapproved alteration of the data. (Optional)

3D Display and Rotation of Parts(Optional)

• XYZ and YBC coordinates conversion
• Mirroring and image reversal of parts

PIPE BENDER MAIN TECHNICAL SPECIFICATION (CNC CONTOL / X SERVO /A SERIES)

Model	Bending Capacity (mm)	Max Bending Radius (mm)	Motor Power (Kw)
DW18CNCX3A-3S	OD 18	R80	3
DW18CNCX6A-4S	OD 18	R80	3
DW25CNCX3A-2S	OD 25.4	R100	3
DW25CNCX4A-1S	OD 25.4	R100	3
DW25CNCX4A-3S-T	OD 25.4	R100	3
DW25CNC6A	OD 25.4	R100	3
DW25CNC×7A-NS	OD 25.4	R100	3
DW25CNC8A3S-T-Ⅱ	OD 25	R70	3
DW38CNC3A1S-C	OD 38	R180	3
DW38CNC3A1S(B+C)	OD 38	R180	3
DW38CNC3A1S	OD 38	R180	3
DW38CNCX3A-2S	OD 38.1	R180	4
DW38CNC4A2S-T	OD 38	R180	3
DW38CNCX4A-3S	OD 38.1	R180	4
DW38CNCX5A-3S	OD 38.1	R180	4
DW38CNCX6A-4S	OD 38.1	R180	4
DW50CNC3A1S	OD 50.8	R250	5.5
DW50CNCX3A-2S	OD 50.8	R250	5.5
DW50CNC3A2S-T-C	OD 50.8	R250	5.5
DW63CNCX3A-2S	OD 63.5	R250	5.5
DW63CNCX8A-4S	OD 63.5	R250	5.5
DW65CNC8A4S	OD 65	R280	5.5
DW75CNCX3A-2S	OD 76.2	R250	7.5
DW75CNCX4A-2S	OD 76.2	R250	7.5
DW75CNCX5A-3S	OD 76.2	R250	7.5
DW75CNCX8A-3S	OD 76.2	R250	7.5
DW75CNCX8A-4S	OD 76.2	R250	7.5
DW89CNC3A1S	OD 90	R300	5.5
DW89CNCX3A-2S	OD 88.9	R250	11
DW100CNC4A2S	OD 100	R300	11
DW120CNC9A3S-T	OD 100	R300	11
DW130CNCX3A-2S	OD 127	R400	22
DW130CNC10AX3S-T	OD 130	R350	86